EAA MC312
- Type: Inertia
- Series/Collection: Girsan MC312
- Action: Semi-Automatic
- Stock Type: Fixed
- Magazine Capacity: 1
- Caliber/Gauge: 12 Ga
- Sight: High Visible Front
- Receiver Material: Steel
- Stock Material: Polymer
- Stock Finish: Black
- Barrel Length: 28"
- Chamber Length: 3-1/2"
- Length of Pull: 14-1/4"
- Overall Length: 50"
- Chokes: Screw
- Width: 1-1/2"
- Barrel Type: Vent Rib
This shotgun is tough and versatile. Out of the box the MC312 runs 12 gauge 3-1/2 inches. We even tested target loads, 12 gauge hot 3-1/2 inches, mixed in the same mag tube and the shotgun still functioned. This is a very difficult task for most shotguns as it requires the bolt to cycle back far enough to load the 12 gauge 3-1/2 inches, but using only the energy from a target load 12 gauge 2-3/4 inches. We really abused this gun in testing. We ran 700 rounds continuous leaving no time to cool, we mixed and matched ammo in a single mag tube, and we put it through some of the most grueling tests we could come up with. We ran the first 5000 rounds with zero cleaning, then ran a 10,000 round endurance test without replacing any parts. For the last test, we disassembled 5 shotguns, placed the parts in a box, mixed the parts up and reassembled the guns with a random selection. The MC312 fired with no adjustment needed.
Features:
- Polymer stock and forend
- Shell release
- Rubber butt pad
- Sling swivel nipple
- Rotating bolt
Related Products
